Help with Solaris G4 install?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=33345
Printed Date: June 08, 2024 at 12:13 AM

Topic: Help with Solaris G4 install?

Posted By: Ashez
Subject: Help with Solaris G4 install?
Date Posted: June 05, 2004 at 8:13 AM

I just took out a working Solaris G4 alarm out of my friends car, and attempted to install it into mines. I used a digi-mm to double check the wires I pulled out, and everything seemed ok. So I use a diagram I found somewhere here, and installed it into my 2001 Mitsubishi Eclipse. Once I felt all possible connections were made, I put the fuses in, and when I press the buttons on the remote, I dont get any response from the alarm. The antenna is mounted around my window without any major bends or curls in the wiring. Im stuck... any recommendations?

Replies:

Posted By: draasch
Date Posted: June 05, 2004 at 9:54 AM

Make:   Mitsubishi
Model: Eclipse
Year:    2000-01
This Database Was Last Updated On:    4/7/2004
Index #: 1765

double check the wires..
Alarm
Constant 12 volts WHITE/ RED IGNITION SWITCH HARNESS
Ignition 12 volts BLUE/RED IGNITION SWITCH HARNESS
Starter RED / BLACK IGNITION SWITCH HARNESS
Dome Light GREEN/ ORANGE (-) FUSE BOX
Trunk Pin Switch RED / GREEN (-) TRUNK LIGHT
Parking Lamp GREEN / WHITE (+) FUSE BOX
Power Lock VIOLET DRIVER KICK PANEL #201
Power Unlock GREEN/ RED DRIVER KICK PANEL

#201- See Negative Pulse Door Lock Diagram.

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt

Posted By: Ashez
Date Posted: June 05, 2004 at 5:17 PM

Yup, all my wires were right. Do you know how to program remotes for the Solaris?