Print Page | Close Window

Clifford Intelligard 200

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=33353
Printed Date: June 04, 2024 at 10:04 AM


Topic: Clifford Intelligard 200

Posted By: Mousehouse
Subject: Clifford Intelligard 200
Date Posted: June 05, 2004 at 12:43 PM

I have one of these alarms in my car as well as a microwave sensor. I am looking for a set of wiring diagrams for the clifford 200. Does anyone know where I can find them?

When I originally had the microwave sensor installed in another car on this same alarm system it was setup to chirp the alarm and not set it off. Since I changed cars and had the alarm installed when the microwave sensor is on it sets the alarm off all of the time. How can I wire it to make it chirp the alarm only?

Thanks in advance for any help.



Replies:

Posted By: sincere0219
Date Posted: June 05, 2004 at 12:45 PM
Maybe its just set to sensitive for the new vehicle. Try turning it down some and see if it works. Then again I am not a expert


Print Page | Close Window