Print Page | Close Window

Driver window problem

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=33386
Printed Date: May 19, 2024 at 6:29 AM


Topic: Driver window problem

Posted By: dougncin
Subject: Driver window problem
Date Posted: June 05, 2004 at 10:41 PM

I bought a window module from  ASIANWOLF.COM everything works except when I push the remote button to roll them down except the driver window goes down about 2 inches and the passenger window goes all the way down like it supposed to do. Is there something I am missing? when I arm both go up with no problem. I don't know if this matters but the truck has a one touch roll down button. I wired the module behind the switch on the drivers door.

2000 Ford Diesel 2door

Ungo SR5000

Thanks for any help

Doug




Replies:

Posted By: draasch
Date Posted: June 06, 2004 at 9:58 AM
i dont a lot of window units, however it sounds like that could be your problem....

you can use a meter and see if you have another wire at the switch that you can use....

see if this info helps:

Window Up D\ WHT/BLK P\ WHT/YEL D\ GRY/ORG P\ YEL/BLK @ MAIN #211
Window Down F/ TAN/BLU F/ TAN/BLU R/ YEL/BLU R/ RED / BLK SWITCH
#211 - See Reversal Rest At Ground Power Window Diagram.

https://wiringinstructions.com/211.htm

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt





Posted By: mito57
Date Posted: June 07, 2004 at 12:07 AM
I bought a module from Asianwolf also. I have the same problem with the 4 windows. It only rolls up about 1 inch each time I activate it. This module has no sensitivity adjustment so I'm going to put a diferent one  which can be adjusted. I hope I'll have more luck. The car is a 2000 Stratus.





Print Page | Close Window