shock sensor problems
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=33392
Printed Date: June 08, 2024 at 4:45 PM
Topic: shock sensor problems
Posted By: gcorrea
Subject: shock sensor problems
Date Posted: June 06, 2004 at 12:13 AM
my viper 350hv has multiplex inputs for the dual stage shock sensor, meaning that both inputs, the blue wire and the green wire can trigger either the warn away or the full trgger. the way the inputs work is based on the signal sent by the shock sensor, if the signal is less than .8 second it triggers the warn away, if the signal is more than .8 seconds it trggers a full alarm. my problem is this my field disturbance sensor and the dei shock sensor both with dual zones dont trigger the warnaway. both sensors go into a full trigger each time. when the exterior zone led on the field sensor comes on it triggers a full alarm, the same with the shock sensor. my question is this i know this is not normal but is there a specific way of adjusting the sensors or can i just buy sensors with that specific type of output, and how would i know wich sensors to buy.
-------------
gcorrea
Replies:
Posted By: onlyremotes
Date Posted: June 06, 2004 at 12:17 AM
you have to use DEI 508D only and shock is the 504D
-------------
Walton Guerrero-Installer/Distributor
Alltech Electronics,Inc
3732 Grissom Lane
Kissimmee, Florida 34741
autotechs.com onlyremotes.com
1-888-252-8324
"Always check your wires with a multimeter"
Posted By: gcorrea
Date Posted: June 06, 2004 at 9:52 PM
are these my only two options to work with my viper. im currently using the omega dual zone proximity sensor and a dei dual stage sensor. like you already know they dont trigger the warn away.i went to your web autotechs.com and i must say i was impresed by your prices, compared to my local shops. just want to make shure these are my working options or should i say working sensors. thanks for the help.
-------------
gcorrea
|