508d install question

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=33514
Printed Date: May 15, 2025 at 3:09 PM

Topic: 508d install question

Posted By: nseck
Subject: 508d install question
Date Posted: June 08, 2004 at 12:26 PM

I have the viper 791xv and I do not know where to plug in the 508d's wiring harness. There are no plugs left does the 508d pug into the slot where the shock sensor goes or not on the viper module. thanks for your help

Replies:

Posted By: Ashez
Date Posted: June 08, 2004 at 4:22 PM

You gotta tap the wires from the 508 to the wires for your shock sensor... I dont remember how it is exactly, but I'll try to find out for you...

Posted By: zargon
Date Posted: June 08, 2004 at 6:13 PM

i think you tie the two wires together from the 508d and tie the twowirestogether fromthe shocksensor and run the two from the shock sensor tothe blue wire and runthe two from the 508d to the green wire

-------------
zargon ruler of estranorth

Print Page | Close Window