Print Page | Close Window

Viper 350HV in a 65 Mustang

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=33529
Printed Date: May 28, 2024 at 2:55 PM


Topic: Viper 350HV in a 65 Mustang

Posted By: csx929
Subject: Viper 350HV in a 65 Mustang
Date Posted: June 08, 2004 at 6:14 PM

I installed a viper 350 hv in my dad's mustang, including a DEI glass breakage sensor, and upon connecting the brain, nothing worked. The siren is not at fault, as when I connect it to power it goes off. The remotes have new batteries, and I checked all of my power connections, they're all good. The brain is grounded properly and has 12v going in. I didn't connect the power door lock connector or the starter kill yet, or the switched igntion, as I was just testing the alarm to see if it armed/disarmed prior to completing the install.

I have a feeling the brain may have been sent to me DOA. However, the store I bought it from folded, and DEI won't help me since i'm not an authorized dealer.

Anyone have any suggestions or ideas as to why the alarm doesn't work? Or is there any way of determing the brain is indeed at fault, and if it is, getting it replaced somehow? Thanks.




Replies:

Posted By: draasch
Date Posted: June 08, 2004 at 7:26 PM
do you or have you programmed the transmitters?????

how old is the system??

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt





Print Page | Close Window