Print Page | Close Window

’88 Celica Door Lock Wires?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=33542
Printed Date: May 12, 2025 at 5:41 PM


Topic: ’88 Celica Door Lock Wires?

Posted By: Coomer
Subject: ’88 Celica Door Lock Wires?
Date Posted: June 08, 2004 at 10:53 PM

Does anyone know which wires I need to tap into for the keyless entry part of an alarm installation on an '88 Celica GT with the factory power door locks?

According to this site, they're supposedly a blue/black wire for the lock wire, and a blue wire for the unlock wire, both of which are in the driver's side kick panel and are negative triggered. I looked and tested quite a few wires but none of them tested out to be the lock or unlock wires, and I couldn't even see any blue/black wires.

Can anyone help me out with this?

Thanks.



Replies:

Posted By: villynne
Date Posted: June 09, 2004 at 12:15 AM

lock / black and blue

unlock / orange   both in the pass side kick panel




Posted By: deviousjoker
Date Posted: June 09, 2004 at 5:51 PM

 POWER LOCK|blue/black          |-  |either kick panel
 POWER UNLOCK|blue and green *2   |-  |either kick panel

*2 Use both wires and diode isolate each.



-------------
First Class MECP Installer


Print Page | Close Window