2000 Eclipse door lock. needhelp

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=33606
Printed Date: May 02, 2025 at 6:43 PM

Topic: 2000 Eclipse door lock. needhelp

Posted By: ajiuo
Subject: 2000 Eclipse door lock. needhelp
Date Posted: June 10, 2004 at 12:12 AM

2000 Eclipse lock System list 4 wires.
a) Lock (-): lt. GREEN/ black
b) Unlock (-): orange
c) Lock Motor: lt. green
d) Unlock Motor: dk. GREEN/ red

My alarm has the following 2 outputs (Compustar swss-as)
1) (-) 250mA unlock
2) (-) 250mA Lock

Now I am assuming that I would connect the “(-) 250mA unlock” to the “orange” wire and the “(-) 250mA Lock” to the lt. “GREEN/ black” wire.

Some peopl have told me I need a relay for this.

Is this true??

Replies:

Posted By: Teamrf
Date Posted: June 10, 2004 at 12:59 AM

Yea connect those wires like you said. You shouldn't need a relay. Nothing really special about the lock/unlock wires on this car.

-------------
~The Rookie~
Rookie of the year that is...
Don't let the smoke out of your equiptment..it doesn't go back in.

Posted By: deviousjoker
Date Posted: June 10, 2004 at 9:35 AM

use the power lock and unlock wires........DON'T use the motor wires

-------------
First Class MECP Installer

Print Page | Close Window