1989 ford expedition door lock problems
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=33608
Printed Date: May 03, 2025 at 6:46 AM
Topic: 1989 ford expedition door lock problems
Posted By: rudedog7976
Subject: 1989 ford expedition door lock problems
Date Posted: June 10, 2004 at 12:22 AM
Ok here is the deal i am installing a k9 mundial 2 in a 1998 expedition. Everything was going good until the door locks, I am thinking that the neg pulse on the alarm is too long. When i arm the alarm the door locks rattle i touched the wires with a grounded test light and if i just tap it it is fine but if i hold it there for a sec they rattle so i read the instructions there is no setting to change the length of the pulse is there somthing i can do to shorten the pulse via resistor or somthing any help would be apreciated
Replies:
Posted By: draasch
Date Posted: June 10, 2004 at 8:52 AM
is it more of a grinding noise????
------------- Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt
Posted By: Teamrf
Date Posted: June 10, 2004 at 9:21 AM
Where are you getting the door lock wires from? It should be a neg. trigger.
-------------
~The Rookie~
Rookie of the year that is...
Don't let the smoke out of your equiptment..it doesn't go back in.
Posted By: rudedog7976
Date Posted: June 10, 2004 at 11:31 AM
they are neg trigger, the problem is the neg pulse from the alarm is too long is there any way i can shorten it? the door locks are engaged too long.........
|