Print Page | Close Window

2004 matrix keyless entry

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=33653
Printed Date: June 11, 2024 at 9:00 AM


Topic: 2004 matrix keyless entry

Posted By: llakhansingh
Subject: 2004 matrix keyless entry
Date Posted: June 10, 2004 at 5:49 PM

can anyone tell me how keylessentry is done on the hyundai  2004 matrix.i'm installing a viper 350hv alarm. 




Replies:

Posted By: llakhansingh
Date Posted: June 10, 2004 at 6:10 PM
if anyone has a wiring diagram.my email is lyndonlakhansingh@hotmail.com.



Posted By: draasch
Date Posted: June 11, 2004 at 6:07 AM
Toyota makes the matrix. is that what you have??

if so ,here you go:

Make:   Toyota
Model: Matrix
Year:    2004
Alarm
Constant 12 volts WHITE OR BLACK IGNITION SWITCH HARNESS
Ignition 12 volts BLACK/ WHITE IGNITION SWITCH HARNESS
Starter RED IGNITION SWITCH HARNESS
Dome Light RED (-) 10 PIN CONN FRONT OF DRIVER FUSE BOX
Trunk Pin Switch RED (-) DRIVERS KICK PANEL
Parking Lamp GREEN (+) DRIVERS KICK PANEL
Power Lock BLUE/WHITE IN DRIVERS KICK PANEL IN
Power Unlock BLUE THE BLUE 10 PIN CONNECTOR * #209

*Using BLUE / YELLOW (-) For UNLOCK Will Give You Driver Door Priority Unlock. This Is The Door Cylinder Wire And Is Located In The Same Connector. #209- See Child Safety Door Lock Circuit. Wire Color Is WHITE In Drivers Kick Panel.


-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt





Print Page | Close Window