Print Page | Close Window

508d

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=33681
Printed Date: May 29, 2024 at 12:18 AM


Topic: 508d

Posted By: osokrayzay
Subject: 508d
Date Posted: June 11, 2004 at 10:44 AM

Does the sensor have to be visible or can it be hidden. Its going into a 2001 mc if you know of a good location let me know pls. I searched this topic , but i was unable to find comprehend their anwsers. TIA



Replies:

Posted By: draasch
Date Posted: June 11, 2004 at 12:45 PM
what kind of sensor is a 508??/

most of your sensors can be mounted under the dash somewhere.





-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt





Posted By: osokrayzay
Date Posted: June 11, 2004 at 2:01 PM
It is directed dual zone proximity sensor. I have Power to it its grounded. I put the green and blue togehter and put it to the green wire of the dual shock sensor that comes with the 791 xv and all that happens is i see the red light come on and then the green light and it wont set it off . Need help pls




Posted By: draasch
Date Posted: June 11, 2004 at 2:04 PM
the green should be for pre-warn

the blues should go to get together...diode isolate each sensor

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt





Posted By: deviousjoker
Date Posted: June 11, 2004 at 2:15 PM

as far as mounting and location..........it cannot be under metal.....and of course the it has to mounted right side up on a flat surface.



-------------
First Class MECP Installer




Posted By: osokrayzay
Date Posted: June 11, 2004 at 2:16 PM
Thx you sirs all done





Print Page | Close Window