99 Nissan Altima GLE

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=33703
Printed Date: August 09, 2025 at 3:17 PM

Topic: 99 Nissan Altima GLE

Posted By: pfellner
Subject: 99 Nissan Altima GLE
Date Posted: June 11, 2004 at 5:33 PM

I've just installed an aftermarket security system (Internet Alarms IAS 100/200) but I need to deactivate or disable the factory "Keyless Entry" system which is interfering with it. The IAS works fine but when I disarm it, it unlocks the doors and sets off the factory system.
I talked to a less than helpful Nissan person at the local dealership who said I could just disconnect the fuse for it. There are 3 separate fuses for it.

Anyone know specifically what needs to be done?

Replies:

Posted By: draasch
Date Posted: June 11, 2004 at 6:21 PM

OEM Alarm Arm L GREEN/ RED (-) AT "SMART ENTRANCE
OEM Alarm Disarm GREEN/ YELLOW (-) CONTROL TIMER" *
* "Smart Entrance Control Timer" Is A BLUE Module Located Behind The Driver Dash To The Right Of The Steering Column.

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt

Posted By: pfellner
Date Posted: June 11, 2004 at 10:08 PM

Draasch. Thank you for the guidance but I'm not sure what I am supposed to do. I am well versed in electronics but by no means am I a professional. Could you help me out some more and explain what I am to do? Thank you VERY much for your help!

Posted By: draasch
Date Posted: June 11, 2004 at 11:11 PM

take yur door lock wires and tap the wires that i sent you.

if you pulse the factory alarm wires, it will arm and disarm the factory system...

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt

Posted By: pfellner
Date Posted: June 11, 2004 at 11:24 PM

Thanks David. I'll give it a shot!

Print Page | Close Window