Eclipse Door lock/unlock Viper alarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=33750
Printed Date: July 27, 2025 at 6:05 PM

Topic: Eclipse Door lock/unlock Viper alarm

Posted By: blindxp
Subject: Eclipse Door lock/unlock Viper alarm
Date Posted: June 12, 2004 at 4:13 PM

My eclipse has a (-)unlock and a (-)lock already tapped into from my last alarm. HOWEVER, my Viper installation guide wants :

vehicle(+) lock trigger circuit.

vehicle(-) unlock trigger circuit.

I've never read about any positive lock, its always (-), wtf do I do there?

Thanks

Replies:

Posted By: draasch
Date Posted: June 12, 2004 at 4:17 PM

is there more info on those wires???

did it just give you the two wires abouve??/

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt

Posted By: blindxp
Date Posted: June 12, 2004 at 4:28 PM

https://bestpricedeverything.com/Wire%20Guide.pdf

I've read that I'm this Negative Type B. I'm assuming so since my last alarm had (-) for lock/unlock anyways.

Thanks for the help

Posted By: blindxp
Date Posted: June 12, 2004 at 4:29 PM

H2/f was already hooked up to a ground wire when I recieved, I don't think it matters since I don't know what car it came off of.... but its more info

Posted By: blindxp
Date Posted: June 12, 2004 at 5:34 PM

Maybe I just won't have keyless entry anymore?

Posted By: padawan
Date Posted: June 12, 2004 at 5:38 PM

Each Viper lock and unlock wire does 2 things...either it's the (+) lock wire or the (-) unlock wire, depending on what u want it to do...Take the viper's wire that is (-)lock/(+)unlock and tap that into ur Eclipse's (-Lock) wire...Take the viper's wire that is (-)unlock(+)lock and tap it into ur Eclipse's (-) Unlock wire...That's it.

Posted By: draasch
Date Posted: June 12, 2004 at 6:12 PM

hook H2 E and H to ground
and then hook H2G to the unlock wire in the car.
H2D to the lock wire.

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt

Posted By: blindxp
Date Posted: June 12, 2004 at 10:42 PM

thanks guys! I'll get to it in the morning and post my success for future searches

Posted By: padawan
Date Posted: June 12, 2004 at 11:05 PM

Didn't know he had a a unit with built-in door lock relays.

Posted By: auex
Date Posted: June 13, 2004 at 1:57 AM

Purple to ground, white and brown to nothing. Blue will be -unlock ouput and green will be -lock output. I am not including stripes on the wire colors. The positive lock trigger in the manual is a typo.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Posted By: blindxp
Date Posted: June 15, 2004 at 9:59 PM

It worked perfectly. Thanks guys!

Print Page | Close Window