Print Page | Close Window

591XV-455J

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=33757
Printed Date: January 19, 2026 at 6:29 AM


Topic: 591XV-455J

Posted By: Lubrano
Subject: 591XV-455J
Date Posted: June 12, 2004 at 6:00 PM

I am installing a 591XV remote start and am using the 4555J interface and am running in to problems.  Confused as to which wires on the brain connect to the interface.  On the interface There is :

red:   12VOLT (easy)

black:  ground (easy)

BLACK/ white:   -3 second pulse (not used no security just start)

green:  green on brain  arm/lock input

blue/white:  ??????????????????????????  -disarm driver unlock input

blue:  ??????????????????????????????  -disarm all doors unlock input

blue/black:  ??????????????????????????  - input from remote start

yellow? black:  data wire on diag plug   yellow/black or yellow/violet

Thanks to everyone




Replies:

Posted By: JWorm
Date Posted: June 13, 2004 at 1:39 PM
The manual is really clear on all of these things.

blue/white - H4/3 (pg 12 in manual) blue wire
blue - H1/6 (pg 10) blue wire
blue/black - blue (-) 200 mA Status output (bottom page 12)
yellow/black - to the yellow/black or yellow/violet wire at the OBDII diagnostic plug under the dash.





Print Page | Close Window