Print Page | Close Window

2004 dakota, clifford rsx 3.5

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=33800
Printed Date: July 22, 2025 at 6:49 PM


Topic: 2004 dakota, clifford rsx 3.5

Posted By: russnvegas
Subject: 2004 dakota, clifford rsx 3.5
Date Posted: June 13, 2004 at 1:18 PM

In the process of installing a clifford rsx 3.5 in a 2004 dakota, can't get the remote start to function. The remote doesn't even show that it is traying to start to truck. Double checked all my connections and everything looks good. Can anyone help?

Russ




Replies:

Posted By: draasch
Date Posted: June 13, 2004 at 1:25 PM
there shold be a wire for the safety neutral switch.....most of the wires need to see a ground or the unit wont even make an attempt to start.....

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt




Posted By: draasch
Date Posted: June 13, 2004 at 1:25 PM
there shold be a wire for the safety neutral switch.....most of the wires need to see a ground or the unit wont even make an attempt to start.....you can ground that wire and see if that helps

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt




Posted By: vegasek9
Date Posted: June 13, 2004 at 3:29 PM

thats it russ!  just take the wire that is the neutral safety and touch it to ground!  it willwork!

just touch it to ground and hit lock/unlock at the same time it should remote start


Print Page | Close Window