Print Page | Close Window

installation instructions Viper 791xv

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=34206
Printed Date: July 19, 2025 at 8:06 AM


Topic: installation instructions Viper 791xv

Posted By: kenpo1441
Subject: installation instructions Viper 791xv
Date Posted: June 19, 2004 at 5:55 PM

I recently purchased a Viper 791xv for a 2000 Explorer. My Dad and I installed majority of the components and it works fine, but I still need to install the remote starter portion and I need to find out what tach wire to connect to so the LED doesn't flash while the car is on. I was told that Directed has a specific install sheet for each vehicle that the dealers have access to. How can I get my hands on one of these? It would make things so much easier.




Replies:

Posted By: profuse007
Date Posted: June 19, 2004 at 7:50 PM
here!!!

-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).




Posted By: kel789
Date Posted: June 19, 2004 at 10:19 PM
hey, is there one for Nissan Maxima '97? thanks.




Posted By: swamprat323
Date Posted: June 19, 2004 at 10:26 PM
you talkign about a wire guide there one here on the vechicle infomation.




Posted By: kel789
Date Posted: June 19, 2004 at 11:04 PM

this is great. thanks swamprat323.






Print Page | Close Window