I have installed a PRO-5007 COMBO. I cannot seem to get the 2 stage door unlock feature to work. After connecting as i read the instructions, it will only lock the doors, no unlock of any doors??
Also i wonder how to connect the trunk release option. I have blown some fuses now and i'm very confused about how it works.. Any help appreciated.
-------------
Nissan X-Trail 2005 model 2.2 dCi. Compustar 2W900FM-AS
Does your alarm have a driver priority unlock feature(2 step unlock)?if it does,you will need a relay and cut driver door unlock wire and use the relay.
as for trunk release,go direct to the trunk release switch,use a test light and test both the wires on the switch,the one that has 12 volts when you push the switch is the correct wire and again you have to use a relay.if your alarm has a negative trunk release wire,hook that wire to pin 86 of a relay,pin 85 and 30 use 12 volts and pin 87 will hook up to release wire at switch.
Yes, my alarm has that feature. There is 2 different wires from the modue. One for unlocking the drivers door first and the other for the rest of the car. I think i connected on the wrong side of the cable going to the drivers lock motor because i'm sure i wired the relay correct. Could this be it? anyway i will have a look at it this weekend. Thanks for the trunk rel. info, i will try that aswell.
-------------
Nissan X-Trail 2005 model 2.2 dCi. Compustar 2W900FM-AS