02 chevy 1500 alarm/remote start
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=34334
Printed Date: June 06, 2024 at 5:43 AM
Topic: 02 chevy 1500 alarm/remote start
Posted By: xmovingx
Subject: 02 chevy 1500 alarm/remote start
Date Posted: June 21, 2004 at 11:25 PM
Can anyone help me out. Just installed a remote start in a ext. chevy 02 truck. And i cant get the car to run, it turns over with the remote start but no run, I use the 2000 wire chart, and hoping thats teh problem. Also i take it the key isnt coded becouse i can start and run the truck with a key from ace hardware. And the check engine light is on now with driveing. Please let me know if anyone can help... If you can please email at xmovingx@msn.com
Thanks a lot..  ------------- X/\/\X
Replies:
Posted By: raydawg357
Date Posted: June 22, 2004 at 8:35 AM
What type of alarm is it? Sounds as if you need to program your alarm to learn the tach. This step is required on many remote starts alarms.
-------------
Do it right the first time
Posted By: xmovingx
Date Posted: June 22, 2004 at 3:52 PM
MSI remote start 2 way.. I have put a couple in boats, and had no problems. Just this truck.. Looking for the right schmatic. I use the 2000 and not sure if all the wires are the same.. I could find the tech wire on the truck.. Cyc. 1 V8 white wire.. Not there..
-------------
X/\/\X
Posted By: kgerry
Date Posted: June 22, 2004 at 4:16 PM
you did install a Passlock bypass module? right?
-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer
Owner/Installer
Classic Car Audio
since 1979
Posted By: xmovingx
Date Posted: June 22, 2004 at 4:20 PM
the little black box.?? lol.. no.. i was thinking that was for a coded key.. and this truck ( the guy that drives it ) starts and runs with a key from OSH or ACE hardware.. A plan jane key.. ------------- X/\/\X
Posted By: hawkinstaller02
Date Posted: June 22, 2004 at 4:37 PM
use the little black box, or you get no remote start!!!!! tach is white wire at ecm, driver side engine comp. #10 off of the ecm it is there!!!! ------------- Did that work???????
-Installer-
Posted By: xmovingx
Date Posted: June 22, 2004 at 4:53 PM
TY.. i'll let you know what happens.. ------------- X/\/\X
Posted By: JWorm
Date Posted: June 22, 2004 at 8:23 PM
Your truck has Passlock II. Its an antitheft system that has a resistance that the trucks computer sees when the key cylinder is turned. Key cylinder isn't turned, or bypass module not installed....truck doesn't start.
It has nothing to do with a "chip" in the key.
Posted By: dalmyd1
Date Posted: June 23, 2004 at 11:23 PM
Correct your truck does have a passlock II.....simply install a 555L from DEI. If installed correctly it should read the resistance code (No key required). The 555L comes with the coloring code for the two wires you're going to need (more than likely it's yellow & orange black). -------------
Posted By: ka3vvv
Date Posted: June 24, 2004 at 2:27 AM
I have a 2003 GMC yukon. You will need a DEI 555L I paid $25.00 for it New off Ebay. You will also need a DEI 456G This will control your door lock . it go on the BCM module keep doors lock when you remote start the truck. I paid $15.00 for that it was price wrong @ Cricut city I didn't say a thing when he ring it up. Now I need help with the smart window module. That aother post. o one more thing you will use the wire for the 555l up where the key go. The black thin wire in the yellow wire. ( don't cut the black ) cut the yellow. good luck
Posted By: ka3vvv
Date Posted: June 24, 2004 at 2:38 AM
sorry about some of the incorrect spelling but it 3:30 am
Posted By: kgerry
Date Posted: June 24, 2004 at 2:23 PM
you DO NOT need a 456G... this data module is only used on the 03 and up fullsize trucks... not 02 and earlier
-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer
Owner/Installer
Classic Car Audio
since 1979
|