790xv warn away

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=34371
Printed Date: July 12, 2025 at 4:37 AM

Topic: 790xv warn away

Posted By: ocbaud
Subject: 790xv warn away
Date Posted: June 22, 2004 at 2:17 PM

my shock sensor isnt working correctly. it will only go off if i bump into the truck REALLY hard and slight bumps will not trigger the warn away(3 short beeps). what could be wrong?

also, my valet/program switch isnt working. i have it plugged into the blue port on the brain, but it wont let me get into the programming mode.

Replies:

Posted By: kgerry
Date Posted: June 22, 2004 at 4:21 PM

programming may have been locked with a bitwriter by whoever installed it...... did you try to adjust the shock sensor sensitivity??

-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer

Owner/Installer
Classic Car Audio
since 1979

Posted By: ocbaud
Date Posted: June 22, 2004 at 4:28 PM

i installed it myself. bought it factory refurbished off of ebay. it says in the install manual that if its locked, it would make 1 long beep if trying to program it.

i did adjust the shock sensor. it will only go on full trigger and the warn away wont work at all

Print Page | Close Window