BMW alarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=34435
Printed Date: May 26, 2024 at 9:39 PM

Topic: BMW alarm

Posted By: soundman2004
Subject: BMW alarm
Date Posted: June 23, 2004 at 2:26 PM

I am trying to install a Stellar BMWSTX alarm in a Z3 that is "pre wired".

I don't seem to have power to the fused wires. Stellars instructions mention that BMW doesn't always include all of the fuses(4) if a car is not shipped with a bmw alarm. I cannot find an empty or blown fuse! The LED doesn't light up.

This sounded like an easy DIY project (I still think it could be )

Please HELP!!

Replies:

Posted By: defective
Date Posted: June 23, 2004 at 3:06 PM

just wire it directly..... that harness is made for a 'BMW' alarm, not a stellar

-------------

Posted By: soundman2004
Date Posted: June 23, 2004 at 3:10 PM

Thanks,

But the stellar alarm is made for a pre wired BMW.

Posted By: auex
Date Posted: June 23, 2004 at 4:57 PM

Pull out your owner's manual and look up which fuses supply power for the security system. Then put fuses into these locations.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Print Page | Close Window