wiring diagram for sigma m30 alarm
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=3449
Printed Date: June 09, 2024 at 5:38 AM
Topic: wiring diagram for sigma m30 alarm
Posted By: manny1
Subject: wiring diagram for sigma m30 alarm
Date Posted: September 08, 2002 at 7:36 PM
i have a sigma m30 alarm i need to find wiring diagram for it so that i can find the wires for accesory on when i switch alarm on for a period of time and to find door lock outputs please can you help me ------------- the sound doctor
Replies:
Posted By: cva2000uk
Date Posted: September 10, 2002 at 6:02 AM
If i remember right the neg out acces wire is brownand the door locking wires are green and black,but dont quote me on that
-------------
"you wont like me, when i get angry" .
Posted By: the12volt
Date Posted: September 12, 2002 at 4:28 PM
Message by manny1 on September 12, 2002 at 4:12 PM
Location: United Kingdom Joined: September 08, 2002 Posts: 4 | | please could someone help me. i need the diagram to find out the wires for an output to power the accssesory for a period of time so that i can close my windows when alarm is activated because no power is fed to them until i turn the key please help me the sound doctor |
Message by the12volt on September 12, 2002 at 5:24 PM - forum administrator- forum moderator
Location: United States Joined: January 08, 1998 Posts: 654 | | You won't need to power the accessory lead to roll up your windows if you use a window module. The module will supply power to the window motor(s) that you tie into and can be activated by a door lock output from the alarm or a (-) armed output (ie: starter kill output).. |
|
Message by manny1 on September 12, 2002 at 4:33 PM
Location: United Kingdom Joined: September 08, 2002 Posts: 3 | | i need a relay output to stay on for about 15-20 after triggering my alarm so that i can close my windows please can anyone help me diagrams please the sound doctor |
Message by the12volt on September 12, 2002 at 5:12 PM - forum administrator- forum moderator
Location: United States Joined: January 08, 1998 Posts: 654 | | Are you using a window module to close your windows or are you trying to use relays instead? If you're using a window module, you can use the door lock output from the alarm or even the (-) armed output to trigger the module. If you're attempting to use relays that stay on for a predetermined amount of time, the best advice I can give you is simply don't do it. |
|
Message by manny1 on September 08, 2002 at 8:42 PM
Location: United Kingdom Joined: September 08, 2002 Posts: 2 | | please could you help me I need wiring diagrams for my window circuit and my door locks also wire identification specifiyed the sound doctor |
Posted By: the12volt
Date Posted: September 12, 2002 at 5:08 PM
Hi manny1, in the future, please include as much information as you did in your previous 4 posts together in one post under one topic. This will help us to help you more efficiently....
|