Cliffnet Pro?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=34544
Printed Date: May 14, 2025 at 4:40 PM

Topic: Cliffnet Pro?

Posted By: mlevett
Subject: Cliffnet Pro?
Date Posted: June 25, 2004 at 6:20 AM

Anyone know where i can get a copy from? would like to sort out my G4 system.

Cheers

Mathew

Replies:

Posted By: datrick
Date Posted: June 25, 2004 at 11:43 AM

go to www.clifford.com

free to download

Posted By: cosmoworks
Date Posted: June 25, 2004 at 12:29 PM

He's talking about the "pro" version, not the free download "consumer" version that's on the clifford site.

Posted By: dei user
Date Posted: June 26, 2004 at 1:33 AM

have to take to dei and clifford authorized dealer they should have one

-------------
dei user

Posted By: mlevett
Date Posted: June 26, 2004 at 8:38 PM

darn, was hopeing there was somewhere to down load the pro version, ahh well.

Posted By: swamprat323
Date Posted: June 26, 2004 at 8:42 PM

You can buy one. Comes with cable also.
Cliffnet Wizard Kit (PRO)

Posted By: TazExprez
Date Posted: July 01, 2004 at 12:57 AM

Do you need to use it with a laptop, or can you connect the alarm directly to a PC, without being connected to the car?

Posted By: datrick
Date Posted: July 01, 2004 at 2:30 AM

alarm has to be connected in the car so that you can diagnose it.

Posted By: TazExprez
Date Posted: July 01, 2004 at 8:38 AM

Thanks, so for diagnostic, it needs to be connected to the car. How about if you just want to program it?

Posted By: TazExprez
Date Posted: July 01, 2004 at 8:57 AM

Thanks, so it has to be connected to the car in order to do diagnostics. Does it also have to be connected to the car in order to program the alarm?

Posted By: TazExprez
Date Posted: July 01, 2004 at 9:00 AM

Sorry for the two similar posts above. I thought the first one didn't come out.

Posted By: datrick
Date Posted: July 01, 2004 at 10:26 AM

In that case I dont see why it would not work. Try to connect all the ground wires (I believe it is one) and all the positive red (I think 4 pieces). and maybe ignition input too.

Print Page | Close Window