wiring window rollup 01 yukon xl

I want to install the window roll up modules in my 2001 gmc yukon xl. does anyone have the diagram for it.  Also installing a compustar cm3000. and i can't seem to find the the right tach wire. I tried all the white wires and the alarm can seem to make it work. I used to have the alarm on a 2000 gm sierra and it work perfect. right now the tach is hooked up to alternator sense. it works but sometimes it start more that once before it keeps running. Also does anyone know the door trigger wire that will work for all doors. so far i found a wire on the bcm, but it only operates the driver front door. Would the wire be on the headlight switch? All help is appreciated, Vu

Ok let me see if i can help you. I have a 2003 GMC yukon

For power door lock I use a DEI 456 It a module. It note on My DEI paper work Note # 3 If Directed module part #456 is not available refer to direcctfax docment # 1601 check this link out  https://www.the12volt.com/installbay/forum_posts.asp?tid=33108&get=last

I had to wire each window in my truck for roll up windows in use a relay with the window module. to put ground on the other side when in use.

Door trg had to be wire @ each door with diode isolate each.

I got the park on the browm wire out @ the park light.