Old alarm, new remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=34638
Printed Date: May 10, 2025 at 1:52 AM

Topic: Old alarm, new remote start

Posted By: Rief
Subject: Old alarm, new remote start
Date Posted: June 26, 2004 at 5:12 PM

Hi, I have a Python 2000 for a few years. No problems with it except for remote batteries. Anyway, my friend gave me a dei 551t. remote start add-on. Installed just fine, with the exception of the alarm disarm/alarm arm wires. I'm not to exactly sure how to wire these to the 2000hf. Any suggestions? Another thing I had lying around was a dei extended antenna. Does the braid get grounded to the car or to the alarm?

Thanks in advance.

Replies:

Posted By: tjdurham
Date Posted: June 26, 2004 at 7:32 PM

if the remote starter isnt setting off your alarm dont worry about those wires as for the antenna cut your current antenna back to 3" from the brain and hook the center to your antenna and solder the braid to your ground

-------------
tj

Print Page | Close Window