Trunk pop wont work on compustar

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=34755
Printed Date: September 11, 2025 at 6:33 PM

Topic: Trunk pop wont work on compustar

Posted By: Sonfps
Subject: Trunk pop wont work on compustar
Date Posted: June 28, 2004 at 5:34 PM

I got the whole thing working, locks, unlocks, senses doors. Everything works, but the trunk pop. I have a 96 pontiac sunfire, i know i have the right wire, because i tested it before by sending a posotive current through it, and it opened. But for some reason the alarm wont open it. I have a 2wfm-as and a cm3000 brain. Any ideas?

Replies:

Posted By: swamprat323
Date Posted: June 28, 2004 at 5:50 PM

On the alarm does it have on board relays? It may be a negtive output and you have to wire a relay.

Posted By: Sonfps
Date Posted: June 28, 2004 at 7:26 PM

now that i look at the diagram, your right, it is a negative signal coming out of the alarm. How would i wire a relay for that? im new at this

Posted By: draasch
Date Posted: June 28, 2004 at 8:55 PM

yes you will need a relay.....

Trunk Release BLACK/ WHITE (+) AT OEM KEYLESS MODULE IN TRUNK * #231

https://wiringinstructions.com/231.htm

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt

Print Page | Close Window