96 Chev PU OEM Power Locks?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=34808
Printed Date: July 07, 2025 at 11:49 AM

Topic: 96 Chev PU OEM Power Locks?

Posted By: mostanything
Subject: 96 Chev PU OEM Power Locks?
Date Posted: June 29, 2004 at 4:25 PM

I'm fixing up a plain 96 C1500 and have installed the factory dash harness for PW, PM, & PL. every thing works except the power locks. The Haynes electrical diagram shows a relay on some models. Where should this relay go and what does it plug into? I also received the keyless module with the harness but there's nothing to plug it into. the lock motors work when voltage is applied directly. Any help is greatly appreciated.

Thanks,

Mostanything

-------------
Mostanything can be fixed

Replies:

Posted By: draasch
Date Posted: June 29, 2004 at 5:37 PM

Power Lock L BLUE DRIVER KICK SEE NOTES ** #203
Power Unlock WHITE PANEL BELOW #202
** Without OEM Keyless See Note #203. With OEM Keyless See Note #202. #203- See Reversal Rest At Ground Door Lock Diagram. #202- See Positive Pulse Door Lock Diagram.

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt

Posted By: mostanything
Date Posted: June 30, 2004 at 8:21 AM

Ok, where do I find the notes 202 & 203 that are referenced?

-------------
Mostanything can be fixed

Posted By: draasch
Date Posted: June 30, 2004 at 9:22 AM

https://www.wiringinstructions.com/203.htm

https://www.wiringinstructions.com/202.htm

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt

Posted By: mostanything
Date Posted: June 30, 2004 at 4:21 PM

Thanks, that helps.

Mostanything

-------------
Mostanything can be fixed

Print Page | Close Window