remote start help

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=3489
Printed Date: June 06, 2024 at 2:17 PM

Topic: remote start help

Posted By: vinh766
Subject: remote start help
Date Posted: September 10, 2002 at 12:33 AM

i have an impulse 990, i can remote start the car normally and all, then put the key in and drive it normal and all, but then when i get to my destination and take my key out, the car is still on, i don't know what's wrong, can someone help me? thank you

Replies:

Posted By: Velocity Motors
Date Posted: September 10, 2002 at 12:58 AM

Did you hook up the brake switch properly ? Test this by starting the car remotely and do not put the key in the igntion at all and press the brake. If the car shuts off then it's connected but if it stay on then you do not have the correct brake wire. Post your results.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: vinh766
Date Posted: September 10, 2002 at 6:52 PM

thanks i guess you were rite, it works normally now, must have been a loose wire leading to the brake sensor. thanks a lot.

Print Page | Close Window