Remote Programing

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=34909
Printed Date: May 12, 2025 at 4:54 AM

Topic: Remote Programing

Posted By: furflier
Subject: Remote Programing
Date Posted: July 01, 2004 at 3:32 PM

I am looking for remote programing for a 98 Dodge Dakota. I have the original keyless entry remote but want to add an extra. Any help would be great.

-------------

Replies:

Posted By: itmdtr
Date Posted: July 02, 2004 at 6:08 PM

From my info, it looks like you need dianostic equipment (scan tool) to be able to program extra remotes.

-------------
itmdtr

Posted By: furflier
Date Posted: July 02, 2004 at 8:13 PM

Thanks for the input. I have been wanting a reason to get a scan tool. Looks like now is the time. Do you happen to know what procedures I need to follow to program this remote.

-------------

Posted By: itmdtr
Date Posted: July 02, 2004 at 10:13 PM

No, sorry. The book I have just mentions that you need a scan tool.

-------------
itmdtr

Posted By: maglin
Date Posted: July 13, 2004 at 9:06 AM

the remotes i have for my car are easy to program. you press the 'stop' button on the remote, and hold the brake down for 5 seconds, and bamo. the remote works with the system. then again, i have a POS bulldog remote starter so *shrugs*

~~Dan

Print Page | Close Window