Print Page | Close Window

Grounding factory alarm disable

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=34961
Printed Date: July 06, 2025 at 5:26 AM


Topic: Grounding factory alarm disable

Posted By: spokman
Subject: Grounding factory alarm disable
Date Posted: July 02, 2004 at 12:16 PM

I've seen one post that recommends permanently grounding the factory alarm disable wire. I want to see what you all think? I'm working on a 95 Ford Explorer and will need to disable the factory alarm. Should the disable wire be a pulsed input, such as from the alarm or can you just ground it as one person indicated? Permanent grounding would be easier if it won't hurt anything.



Replies:

Posted By: spokman
Date Posted: July 05, 2004 at 2:35 PM
No takers?


Print Page | Close Window