No cruise after alarm install
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=34987
Printed Date: May 12, 2024 at 8:16 PM
Topic: No cruise after alarm install
Posted By: snakoiler
Subject: No cruise after alarm install
Date Posted: July 03, 2004 at 9:48 AM
I installed an avistart 4300 with remote start, starter kill and all the bells and whistles on a 99 intrepid but I noticed the cruise control doesnt work anymore. i checked the ignition harness and everything seems connected correctly, i retraced my steps but cannot getthe cruise to work, the light come on but it does not engage, I checked fuses and all are ok, any ideas, does the cruise have to be wired through the alarm in some way? thanks
-------------
snakoiler
Replies:
Posted By: snakoiler
Date Posted: July 03, 2004 at 12:41 PM
I bypassed the brake switch that connects to the alarm and ran the wire to the rear brake light and still no cruse, any ideas?
-------------
snakoiler
Posted By: NowYaKnow
Date Posted: July 03, 2004 at 4:31 PM
1. Try disconnecting your brake wire and see if it works.
2. Try reconnecting your starter wire to it's original form and see if it works.
Mike
Posted By: Ashez
Date Posted: July 03, 2004 at 6:37 PM
I have this problem also, but I have a 01 Eclipse. I believe I have a 3 wire switch. Manual tranny... I tried what NowYaKnow said, but still dont work
Posted By: TheBayArea
Date Posted: July 04, 2004 at 1:11 AM
For those that dont know (Like me), how do we meter the switch if its working?
|