Print Page | Close Window

Clifford RSX 3.5 w/ DEI 530T Maufuction?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=35110
Printed Date: June 01, 2024 at 8:39 AM


Topic: Clifford RSX 3.5 w/ DEI 530T Maufuction?

Posted By: Koontek
Subject: Clifford RSX 3.5 w/ DEI 530T Maufuction?
Date Posted: July 06, 2004 at 4:49 AM

Hey Guys
I have a 98 Honda Accord V-6 with a Clifford RSX 3.5. Well last night I was hooking up my DEI 530 T Window Automation System and everything seems to work fine except my passenger window. Both windows roll up when arm, vent and roll down with the alarm fine. But when i try using the switches the passenger side window doesnt work correctly. It closes the window about 1-2 inches then stops when you try to roll it up or down from both switches. The drivers side works fine. I dont get it. I tried searching for this topic but could not fine my exact answer. Thanks for all the help guys!




Replies:

Posted By: JWorm
Date Posted: July 06, 2004 at 11:10 PM
Have you adjusted the sensitivity dipswitches on the 530T? Where did you get the main power wire for the 530T? Where did you ground it? Did you connect the wires for the passenger window in the passenger door?




Posted By: Koontek
Date Posted: July 07, 2004 at 12:22 AM

Hey Jworm,

Thanks for replying to my post. No i did not adjust the dipswitches on the unit itself cause i figure it was fine since it rolls the window up and down fine when used with the alarm. I got the main power wire from the fuse box (its also connected to my alarm brain), and yes i  did run the wires all the way to the passenger door for the switch and motor. Do i need to ground it in my door? Its just weird how when i try to roll my window down or up it just just vents up untill its close. Let me know your thoughts on this. Thanks!





Posted By: Koontek
Date Posted: July 10, 2004 at 7:46 PM

Well, i just tried playing with the dip switches and no luck. I have no idea whats going on with it. I also tried another brain unit and it did the same thing. Any ideas guys ?






Print Page | Close Window