push button starter

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=35170
Printed Date: May 19, 2024 at 12:00 PM

Topic: push button starter

Posted By: wolforkvw
Subject: push button starter
Date Posted: July 07, 2004 at 6:56 AM

I want to install a push button starting mechanism on my 1978 Cutlass. Is it possible to do this in a way that i won't have to use a key at all to start it. I plan to have security system and have a second hidden switch if it is possible.

-------------
Vernon william

Replies:

Posted By: Javelin3o4
Date Posted: July 08, 2004 at 12:40 AM

you can do it you will need to connect a wire to the starter solenoid and to one side of the starter button, then a 12volt source to the other side of the switch so when you press the button it cranks the car, you will still have to have your key in the on position to unlock the steering wheel and send power to your ignition coil and other accessories.

Print Page | Close Window