Security light on 2002 Chevy Suburban
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=35216
Printed Date: May 06, 2024 at 10:54 AM
Topic: Security light on 2002 Chevy Suburban
Posted By: TazExprez
Subject: Security light on 2002 Chevy Suburban
Date Posted: July 07, 2004 at 11:47 PM
One of the installer's at the shop installed a remote start alarm on a Chevy Suburban 2002. Now every time the car is turned on, the factory security light is also turned on. We used one of the Directed bypass modules on this. What do you think is going wrong with the installation? Thanks for your help in advance.
Replies:
Posted By: TazExprez
Date Posted: July 08, 2004 at 10:10 AM
Also, the remote start and everything on the alarm is working fine. It's just the factory security signal that is on in the dash display.
Posted By: swamprat323
Date Posted: July 08, 2004 at 1:16 PM
i saw this once b4, but was another make or car. not all the IGN wires needed to be used for remote start. but with the bypass module we had to. did not understand it, but it work.
Posted By: kgerry
Date Posted: July 08, 2004 at 1:30 PM
did they hook up the security arm/disarm wires??..this has nothing to do with the Passlock feature, you also have to shut down the factory alarm......
-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer
Owner/Installer
Classic Car Audio
since 1979
Posted By: TazExprez
Date Posted: July 08, 2004 at 2:16 PM
Thanks for your help guys. I'll ask him what he did and give him your suggestions. We've done this car before, but this is the first time we encountered this problem. Also, how do you disarm the factory alarm? Thanks again.
|