Tach and hood sensor wire, alarm wiring i
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=35242
Printed Date: May 15, 2025 at 5:22 AM
Topic: Tach and hood sensor wire, alarm wiring i
Posted By: sigma_x
Subject: Tach and hood sensor wire, alarm wiring i
Date Posted: July 08, 2004 at 2:57 PM
Where is the tach wire, and the hood sensor wire, in a 93 325is? The DEI guide said the tach is behind the cluster, but there has to be a easier place to find it. Can anyone help? Thanks!
-------------
1993 BMW 325is
Replies:
Posted By: profuse007
Date Posted: July 08, 2004 at 3:20 PM
tach wire can be found at an injector, find the unique wire from all of the injectors.
hood pin- isnt there a hood pin given to you?
-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).
Posted By: swamprat323
Date Posted: July 08, 2004 at 3:26 PM
Black at coil or Green at diagostic plug, were that does not say.never work with a BMW. hood use your own.
Posted By: sigma_x
Date Posted: July 08, 2004 at 3:33 PM
I'll use my own hood pin sensor, I just thought that using the stock (As I always have in the past) would be easier, but I can do my own easily enough.
swamprat323 - Thanks! Where is the diag plus located?
-------------
1993 BMW 325is
Posted By: swamprat323
Date Posted: July 08, 2004 at 3:45 PM
im not sure were it is at, it does not say. was there any plugs that can be easy to get to withote taking panels off. mine was right under the main panel that right under the stearlin wheel. not sure what it called. if all eles fails just go to the coil.
Posted By: sigma_x
Date Posted: July 09, 2004 at 1:47 AM
I bet I can find the diag plug in the BMW manual, lol I should have checked there :)
-------------
1993 BMW 325is
|