Remote Starter & Door Locks not working

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=3538
Printed Date: July 18, 2025 at 9:54 PM

Topic: Remote Starter & Door Locks not working

Posted By: beslt
Subject: Remote Starter & Door Locks not working
Date Posted: September 11, 2002 at 3:15 PM

Hello I installed the Buldog RS102e remote starter and have a 1995 Jeep Grand Cherokee. Everything works accept locking the door locks. I can unlock the door and even lock and unlock while the vehicle is running. But is the vehicle is not running than unlock is the only time it works.

Any suggestions.

Thanks

Replies:

Posted By: Tong
Date Posted: November 22, 2002 at 1:37 AM

HI,

Sorry can´t help you butI I have a question for you!

what signal did you use? tach or alternator, and what was the colour?

We have a -94 and can´t find the alternator cabel for remotestart.

-------------
tong

Posted By: jrilla
Date Posted: November 22, 2002 at 5:37 AM

Tong Look for a Gray/Blue wire at the PCM which is high on the passenger side firewall under the hood.

Beslt: Sounds Bizarre to me, what wires do you have tapped into and how did you do it?

-------------
J Rilla

Owner/Installer

Posted By: cpgoose
Date Posted: November 25, 2002 at 7:38 AM

hey beslt, you should try calling Bulldog Tech Support, they're pretty good. I've called them a number of times, and they've helped quite a bit. 800-878-8007

Print Page | Close Window