Ignition 2
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=35421
Printed Date: May 20, 2024 at 4:17 AM
Topic: Ignition 2
Posted By: meh66
Subject: Ignition 2
Date Posted: July 11, 2004 at 5:57 PM
I have another question, I also found out that the 91 Mx do not have an ignition 2 wire as indicated as GREEN / WHITE per the wiring diagram, but I have a question. Could I connect the igniton 2 from the alarm module to the cold start wire which is BLACK/ green or GREEN/ red or should I just use the one starter wire from the alarm with or without additional relays?
-------------
MEH66
"Car Performance and Mobile Electronic Enthusiats"
Replies:
Posted By: kgerry
Date Posted: July 12, 2004 at 2:10 PM
no you want to use a relay off the existing crank wire...you dont want that circuit powered all the time, only during crank
-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer
Owner/Installer
Classic Car Audio
since 1979
Posted By: meh66
Date Posted: July 12, 2004 at 3:40 PM
will do....thanks I was not even looking at that.
-------------
MEH66
"Car Performance and Mobile Electronic Enthusiats"
|