Ignition 2
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=35422
Printed Date: May 14, 2025 at 8:28 AM
Topic: Ignition 2
Posted By: meh66
Subject: Ignition 2
Date Posted: July 11, 2004 at 5:59 PM
I have another question, I also found out that the 91 Nissan Max do not have an ignition 2 wire as indicated as GREEN / WHITE per the wiring diagram, but I have a question. Could I connect the igniton 2 from the alarm module to the cold start wire which is BLACK/ green or GREEN/ red or should I just use the one starter wire from the alarm with or without additional relays?
-------------
MEH66
"Car Performance and Mobile Electronic Enthusiats"
Replies:
Posted By: meh66
Date Posted: July 12, 2004 at 1:18 PM
I think I will connect the ignition 2 output from the alarm to a relay similar to the starter wire output. I will let everyone know how it goes.
-------------
MEH66
"Car Performance and Mobile Electronic Enthusiats"
|