2001 Mitsubishi Galant alarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=35626
Printed Date: July 23, 2025 at 9:41 AM

Topic: 2001 Mitsubishi Galant alarm

Posted By: Clubmed112
Subject: 2001 Mitsubishi Galant alarm
Date Posted: July 15, 2004 at 6:10 AM

Hello, I am trying to install an alarm i bought off of ebay, it has some wiring directions, but i just need a chart where i can find all of the places i need to wire all of this stuff into. I have a 2001 mitsubishi Galant Es v6. Let me know if you need any more info.

Thanks.

James

Replies:

Posted By: raydawg357
Date Posted: July 15, 2004 at 7:37 AM

12volts	blue / YELLOW	+	ignition harness
Starter	BLACK / YELLOW	+	ignition harness
Second Starter
Ignition	BLACK/ white	+	ignition harness
Second Ignition
Third Ignition
Accessory	blue/red	+	ignition harness
Second Accessory	blue/black	+	ignition harness
Keysense
Power Lock	purple	-	either kick panel or
Notes: The door lock wires are in a black plug behind the fuse box, above a green module.
Power Unlock	lt. GREEN/ red	-	either kick panel or
Notes: The door lock wires are in a black plug behind the fuse box, above a green module.
Lock Motor	blue/red		drivers kick panel
Unlock Motor	blue/black		drivers kick panel
Parking Lights+	GREEN / WHITE		at the fuse box
Parking Lights-
Hazards
Turn Signal(L)
Turn Signal(R)
Reverse Light
Door Trigger	GREEN/ orange	-	top front of the fuse box
Dome Supervision
Trunk/Hatch Pin	white	-	at light in the trunk
Hood Pin	blue/black	-	underdash fuse box
Trunk/Hatch Release
Power Sliding Door
Factory Alarm Arm
Factory Alarm Disarm	red	-	drivers door harness
Notes: When doing remote start on vehicles with factory alarm, must also interrupt the blue/red (-) key sense wire at the steering column using the status output wire to bypass the factory starter kill.
Disarm No Unlock
Tachometer	white		instrument cluster or
Notes: On the 6 cylinder models, the white tach wire can also be found at the distributor. On the 4 cylinder models, the tach wire can also be found at the ignition failure sensor on the intake manifold, the white wire is in a 4 pin plug with three BLACK/ stripe wires.
Wait to start
Brake Wire	green	+	brake pedal switch
Parking Brake
Horn Trigger	lt. green	-	steering column
Memory Seat 1
Memory Seat 2
Memory Seat 3

Immobilizer Bypass Module:	Required: Yes	Type: Transponder	Part #: 556U or 555U
Notes: N/A

-------------
Do it right the first time

Posted By: Clubmed112
Date Posted: July 15, 2004 at 10:22 AM

ok, but i really have no idea what i am doing, is there any guides on how to install a car alarm? I am really lost here, i think i might have to take it to get it installed by a pro. Do you think $100 is a good deal?

Posted By: raydawg357
Date Posted: July 15, 2004 at 10:26 AM

In your case you will better off letting a pro do the install. $100 is okay if the alarm is worth it. You can't trust everything from ebay. Most install shops don't charge if you purchase the alarm from them, and with this, if the alarm is bad you can return it to them to have them troubleshoot the problem or replace the alarm all together. With the ebay alarm, it's as is, with no other guarantee it will work. The choice is yours.

-------------
Do it right the first time