Window automation

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=35759
Printed Date: May 13, 2024 at 12:17 AM

Topic: Window automation

Posted By: TownAndcountry
Subject: Window automation
Date Posted: July 17, 2004 at 10:01 PM

Does anyone out there have a wiring diagram to allow you to control the windows in addition to the "venting" and "arm roll up?" What I'm looking to do is use some auxilary outputs to be able to roll the windows up and down independantly from arming the alarm. I know it's possible, I've know it's been done, I'm just too lazy to sit down and figure it out.

T & C

Replies:

Posted By: eurotech
Date Posted: July 18, 2004 at 2:59 AM

you will still need to get the window automation modules to acheive your goal....are you wanting to control it with the aux on the remote of your alarm? what alarm do you have? the module that you want is a 530T by DEI

Posted By: TownAndcountry
Date Posted: July 18, 2004 at 2:49 PM

Thanks, but nevermind, I figured it out. Ialready have a 530T, I was looking for wiring info to add to its features. I'll have a wire diagram on our website when its up and running. Thanks

-T&C

Print Page | Close Window