wow, compustar installation guide is a very poor written manual. i hope you compustar expert folks can help. i would like to map out all the wires before i start the installation. On CN1, there are 2 constant power with 30amps that i will cut and attach them near to the battery. if that is good i would like to move on to the relays. the list below is questions on CN1. i have a Nissan Maxima '97. thanks i appreciate the effort.
CN1
1) red - 12v
2) gr/wh - pking light
3) RED / wh - 12v
relay - blue - 2nd ignition ???
- violet - starter ?????
4) white - accessory
5) violet - relay ???
6) Yellow - relay ??? -
7) red - relay ???
green - ignition -?????
8) black - ground
----------------------------------
3) this wire has a relay out with 2 wires. one of the 2nd ingnition and the other may be for the starter? what about the 3rd ignition that nissan maximas have? i guess i do not need to deal with the 3rd ignition.
5)6)7) are connected to one relay and out from the relay with 2 wires. yellow is for the starter? yellow/blk is for _____?
7) green is for the ignition?
[img]https://memimage.cardomain.com/member_images/7/web/367000-367999/367668_18_full.jpg/[img]
i found the answers. please delete.