Has any one done a remote start on a 2001 Chrysler Town and Country i am having problems finding the heater/ac wire off the ignition harness has anyone had expieriance with this vehicle any help will be much appriectiated
-------------
Play It Till It Hertz, Bag it then drag it
I've done a bunch of them. There is no "accessory" wire like other vehicles.
You need to hook up the igntion wire (pink/white), the starter wire (yellow). The last wire that needs to be hooked up is PURPLE / brown and needs to see ground thru a 180 ohm resistor during start only. Its a multiplexed wire that activates the heater and other things. Carefull where you get constant power on that van....the wire at the ignition harness is fused at 10 amps and will easily blow if you try powering anything that is high current.
If you need help wiring the relay for the second starter wire, let us know what kind of remote start you have.
Thank you for the info it is very useful the remote start im working with is a Black Widow b/w6150, just so im sure the PURPLE / brown gets ground when starting once the van starts does it get 12 volts? well wait you said it is multiplexed so that would lead to believe it would be low voltage then. please help me make my Chrysler headache go away till i can use it the right way the first day i work on the car
By the way just to ask cause the name sounds a bit familiar where are you from if you dont wanna answer no prob just thought maybe you were in a car club and ive heard the name before
Thank you for your time Joe
All The Right Connections
Riverbank, Ca 95367
-------------
Play It Till It Hertz, Bag it then drag it