valet code recovery

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=35933
Printed Date: July 13, 2025 at 5:04 AM

Topic: valet code recovery

Posted By: joeyoone
Subject: valet code recovery
Date Posted: July 21, 2004 at 2:17 AM

The default code for my Clifford Concept 100 does not work. I think I may have changed the code, is there a way to recover the code?

Replies:

Posted By: cosmoworks
Date Posted: July 21, 2004 at 2:01 PM

Use the wizard to reset it.

Posted By: zplatt
Date Posted: July 22, 2004 at 5:37 AM

I have this problem with my g4 but the wizard asks for the code before it will allow you to access the alarm ECU...and I have the 2.1 pro version!!

Posted By: sparkie
Date Posted: July 22, 2004 at 7:11 PM

If the valet code on any Clifford product has been changed from default, then the only thing that can be done is to return the main brain to a dealer. They should be able to return it to the manufacturer and have a new micro-processor installed. You will have to pay for this. If the unit isn't a recent model, you may be out of luck as Clifford was bought over by DEI and they don't look after any old product. Most Clifford alarms could be placed inot valet either by the coded valet switch of by pressing the Unlock and option buttons together if my memory is acurate.

-------------
sparky

Posted By: cosmoworks
Date Posted: July 26, 2004 at 11:32 AM

Concept 100 is placed into valet by pressing the two left buttons on the remote simultaneously. (The * and headlight buttons).

Posted By: swamprat323
Date Posted: July 26, 2004 at 8:20 PM

How many code can it possibly have? My guess is 1-9. but not sure on yours. just go through one by one. may have to wait a bit as you go through each one.

Posted By: swamprat323
Date Posted: July 26, 2004 at 8:26 PM

went through the manural----------to many codes