99 silverado push button start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=35938
Printed Date: May 29, 2024 at 5:00 AM

Topic: 99 silverado push button start

Posted By: bigg4x4
Subject: 99 silverado push button start
Date Posted: July 21, 2004 at 7:53 AM

I am trying to install a pushbutton starter on my 99 silverado. I also have a button to kill the motor. I am not sure on which wires to connect to. Any help is greatly appreciated. Thanks

Replies:

Posted By: defective
Date Posted: July 21, 2004 at 9:04 AM

its a nightmare, youdprobly haveto install a remote starter then use the button to ground the negative trigger.

-------------

Posted By: bigg4x4
Date Posted: July 21, 2004 at 11:09 AM

Ok, I know where to wire the button, but i have a few questions. I am using a industrial controls momentary pushbutton. Do I need to use a relay, and if I do, what should I get and how should it be wired up. The key will still have to be int he ignition in order to unlock the wheel and turn on teh gauges, right? Thanks

Posted By: dc-auto
Date Posted: July 22, 2004 at 12:20 AM

If the switch is an industrial momentary switch you shouldn't need a relay. It is never a bad idea to use a relay thought. Your right about the key, you will need to turn the key on then push the button

-------------
dc-auto

Remember it's just Ohms Law

Print Page | Close Window