Print Page | Close Window

Alarm/Remote RSA924 problem

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=35967
Printed Date: June 05, 2024 at 6:50 AM


Topic: Alarm/Remote RSA924 problem

Posted By: mereo
Subject: Alarm/Remote RSA924 problem
Date Posted: July 21, 2004 at 7:13 PM

Just installed my new Alarm/remote RSA924 https://www.12voltdirect.com/product.aspx?prodid=RSA924 after som trouble https://www.the12volt.com/installbay/forum_posts.asp?tid=35781&PN=1 . My problem now is that when I connect the alarm/remote for the first time it's just making a rapid chirping sound. In the manual it says that it should go into alarm mode the first time you connect the alarm/remote. The chirping sound stops when I turn on the igition. And the lights on the antenna seams not to work, still havn't seen any light from them anyway. What could the problem be?



Replies:

Posted By: dc-auto
Date Posted: July 22, 2004 at 12:03 AM
when the alarm is going off, use your transmitter to disarm the alarm.  Then proceed with what ever you need to do at that point.

-------------
dc-auto

Remember it's just Ohms Law


Print Page | Close Window