Print Page | Close Window

Dodge Power Distribution Center (PDC)

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=35971
Printed Date: July 12, 2025 at 10:39 AM


Topic: Dodge Power Distribution Center (PDC)

Posted By: ectwo
Subject: Dodge Power Distribution Center (PDC)
Date Posted: July 21, 2004 at 8:25 PM

Hi,

I'm looking wire in my Viper 790Xv into my 2001 Dakota 4x4.  I want to wire all the fuses (5 of them) into the factory power distribution center(PDC) under the hood and the interior junction box. 

The junction box isn't a problem, the PDC under the hood is, the power side pinch terminals that bite the fuse blades are all there, but the blade"pinch-terminals" for the protected side of the wire isn't.  Can you buy the ferrules that attach to the protected side of the fuse, or should I be looking in the scrap yard to butcher a wiring harness?




Replies:

Posted By: ectwo
Date Posted: July 21, 2004 at 11:21 PM

BTW,

I have the mini ATO fuses if that helps...


Print Page | Close Window