Print Page | Close Window

Mazda MPV 2000 - Door Locks

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=36045
Printed Date: July 18, 2025 at 5:59 AM


Topic: Mazda MPV 2000 - Door Locks

Posted By: bengoshi2000
Subject: Mazda MPV 2000 - Door Locks
Date Posted: July 23, 2004 at 12:39 PM

Just wanted to know if I my MPV has a 1, 2 or 3 wire system  (- or +).  I am planning to do an install this weekend and my volt/ohm meter is on the fritz (and I am not keen on spending the $ on another one just yet).

FYI - my '00 mpv has neither a factory alarm nor keyless entry.

Is there a more detailed wiring guide available than the one on this site?

Thanks!

Bengoshi2000




Replies:

Posted By: tampa77
Date Posted: July 24, 2004 at 10:03 AM

(-) 1 wire system. May require a 1200 Ohm resistor to ground.




Posted By: slicksam
Date Posted: July 24, 2004 at 3:03 PM

according these notes.....you need a 2.2 k resitor to LOCK and straight ground to unlock

location = driver kick panel

color = light green

https://www.the12volt.com/installbay/detail.asp?info=alarm&year=2000&make=Mazda&model=MPV%20Van&ID=18305&type=Alarm

enjoy

Later

Slicksam


Print Page | Close Window