hooking up a 530t?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=36058
Printed Date: May 09, 2024 at 6:17 PM

Topic: hooking up a 530t?

Posted By: rghrdr18
Subject: hooking up a 530t?
Date Posted: July 23, 2004 at 3:55 PM

I am trying to hook up a DEI 530t to a Mitsubishi Eclipse Spyder rear windows and was wondering if anyone knows which wires are which (because the wiring diagram on this site does not have them) or the easiest way of finding the wires.

Replies:

Posted By: TownAndcountry
Date Posted: July 23, 2004 at 6:30 PM

I would go right to the switch for the windows, follow them through the door, test them, then hook it all up.

-T&C

Posted By: rghrdr18
Date Posted: July 23, 2004 at 7:10 PM

What would be the easiest way of testing the wires. How can I tell which are which other than power and ground?

Posted By: TownAndcountry
Date Posted: July 24, 2004 at 5:19 PM

If you've ever hooked up a "five wire" lock system, it's simular to this. you have to to test for your window up and down, for each window. then cut the wire, test which side tests 12 volts when you hit the switch. I would find a diagram for the 530t.

Posted By: rghrdr18
Date Posted: July 24, 2004 at 7:45 PM

thanks I'll try that!

Posted By: TownAndcountry
Date Posted: July 24, 2004 at 7:50 PM

I just thought about the last time I did window aut. I pulled the switch assembly free from the door, then tested there. Then try to see where the wires come from the door into the car, in the driverside kick, you can make all your connections there. I would, however, get 12 volts from the column, not any smaller gauge wiring. You could also double up your wiring from your switches--window wiring--530t, it may help your roll up and down performance.

Print Page | Close Window