help programing omega remote

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=36065
Printed Date: July 22, 2025 at 11:36 AM

Topic: help programing omega remote

Posted By: druidone
Subject: help programing omega remote
Date Posted: July 23, 2004 at 6:29 PM

I've got an Omega Executive 2300 keyless entry/trunk release and a pair of omega 107 remotes. What I don't have is the instructions on how to program the remotes to the brain. I've tried several suggestions I've found on here doing a search but none have worked.

(Tried turning car on/off then push valet 5 times, and tried another suggestion I found that said to turn on/off/on/off/on and then hold valet for 5 seconds)

Any help or suggestions appreciated.

Replies:

Posted By: draasch
Date Posted: July 24, 2004 at 10:16 PM

try turning the key to the on position and pressing the valet buttons 5 times. if the siren makes noise then press one of the buttons on a transmitter, the siren should chirp. press a button the second transmitter. siren chirp again. turn key off. now if you here some chirpping when you go to start the car, that will stop after 48 hours....if that doesnt work, drop me a line and i will get the the correct info for you.....

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt

Posted By: auex
Date Posted: July 24, 2004 at 10:55 PM

The omegas that I have worked with are the on/off/on/off/on then hold the valet button, the alarm should chirp. Then push a button on each remote in turn.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.