Need Baretta alarm Diagram

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=36112
Printed Date: May 11, 2024 at 9:10 PM

Topic: Need Baretta alarm Diagram

Posted By: jmike314
Subject: Need Baretta alarm Diagram
Date Posted: July 24, 2004 at 9:17 PM

I'm new here and have a desparate situation.
I have an old Baretta car alarm and would like to install a new alarm.
I was hoping to not have to remove all of the wiring and start anew...I would like to just use the existing Baretta wires and splice them to the new alarm.

Problem is....I do not have the wiring diagram for the Baretta.
- Model: PEUP-1
- RF Auto Alarm
- Made in USA
- 02/1994
The new alarm is a Freedom 200 and it's going into an Isuzu 1993 Spacecab Pickup.

Any and all help will be greatly appreciated.

jms

Replies:

Posted By: draasch
Date Posted: July 24, 2004 at 10:04 PM

you would be better off starting from scratch.....

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt

Posted By: jmike314
Date Posted: July 25, 2004 at 12:09 AM

@ draasch
Then scratch it may have to be.
I got your PM but was unable to reply as your inbox was full it seems.

I guess I'll have to spend my day off underneath the dash of my pickup and get things set up proper.

jms

Posted By: TownAndcountry
Date Posted: July 25, 2004 at 1:27 PM

Yeah, good call, never a good idea trusting other installers, if you're unsure of their work

T&C

Posted By: sroth140
Date Posted: July 26, 2004 at 1:33 AM

just look under the dash and the kick panel. its all right there and easy to get to.

-------------
MECP certified installer