programming keyless entry

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=3631
Printed Date: July 22, 2025 at 9:01 AM

Topic: programming keyless entry

Posted By: terryscomputer
Subject: programming keyless entry
Date Posted: September 14, 2002 at 3:45 PM

i have a 1993 ford explorerand i bought a second remote from ford and they gave me a general description of what type of remote i have (type b). it says to go to the drivers rear quarter panel and jump the two wires to set program mode. my question is which two wires am i suppost to jump, they either don't know at the ford dealership or just stupid. i talked to the parts and service dept but no one could help me. can you? thanks terry

Replies:

Posted By: Scott35
Date Posted: September 14, 2002 at 9:41 PM

Pull the tool panel cover off and look for a black plastic plug. You will have to feel around for it. When you find it just take a paper clip and jump it.

-------------
Tacomacrew

Print Page | Close Window